The most low-maintenance way to make your lashes to appear fuller and more prominent with no mascara needed. Waterproof, drip proof, smear proof, and sweat proof.
How To Use:
If using single application packets:
Squeeze a small amount of solution No 1 onto the end of the applicator stick
Apply to the inside of your arm
Do the same with solution No 2 and apply over the same spot as solution No 1. Let stand one minute and wipe clean
Place both foil packets back into the zip lock bag and store in a cool, dry place. Wait 24 hours. If no visible signs of irritation exists, you may proceed with tinting the lashes. Do not use this product if irritation is visible
If using multi application tubes, remove cap on solution No 1 Cream Colorant and use the cap to pierce the protective film on the tube. Follow the same instructions as above.
TINTING YOUR EYELASHES
For best results, wash lashes thoroughly with a mild soap and warm water, or use an oil free makeup remover. Let dry before tinting.
It is best to tint one eye at a time. Apply a thin coat of petroleum jelly under the eye area and apply enclosed eye shields. Make sure eye shields are placed directly below the lower eyelashes. This will prevent staining
If using single application packets, remove the work station card and squeeze the entire contents of solution No 1 and No 2 onto the marked circles. DO NOT MIX
If using multi application tubes, remove cap of solution No 1 Cream Colorant and pierce the protective film on front end of the tube
Apply solution No 1 onto the lashes with enclosed applicator in a downward motion towards the eye shield. Let stand a few seconds. Do not remove color
Wipe applicator stick clean and apply solution No 2 over solution No 1. Be sure to coat each eyelash hair thoroughly including ends and corners of the eyelashes. Let stand one minuteRemove color with a damp tissue by wiping downward towards the eye shield. Wash lashes with water to remove any residue. The tinting process is now complete
TINTING YOUR EYEBROWS
Apply petroleum jelly around the eye area to prevent accidental staining. Be careful not to get any on the eyebrows
.Follow directions 2-5 for tinting the eyelashes. They are the same
STAINING THE SKIN HAS OCCURRED
Stains will disappear in 1-2 days. To speed up the process, create a mild exfoliate of water and sugar, and rub gently on stain and rinse with waterApply a matte makeup or powder to cover stain.
A SLIGHT STINGING SENSATION AFTER APPLYING HAS OCCURRED
A slight stinging sensation is somewhat common and should subside quickly after rinsing with water. If stinging persists, discontinue use and seek medical attention.
GODEFROY
28 Day Mascara Black 25 Application Kit
The most low-maintenance way to make your lashes to appear fuller and more prominent with no mascara needed. Waterproof, drip proof, smear proof, and sweat proof.
How To Use:
If using single application packets:
Squeeze a small amount of solution No 1 onto the end of the applicator stick
Apply to the inside of your arm
Do the same with solution No 2 and apply over the same spot as solution No 1. Let stand one minute and wipe clean
Place both foil packets back into the zip lock bag and store in a cool, dry place. Wait 24 hours. If no visible signs of irritation exists, you may proceed with tinting the lashes. Do not use this product if irritation is visible
If using multi application tubes, remove cap on solution No 1 Cream Colorant and use the cap to pierce the protective film on the tube. Follow the same instructions as above.
TINTING YOUR EYELASHES
For best results, wash lashes thoroughly with a mild soap and warm water, or use an oil free makeup remover. Let dry before tinting.
It is best to tint one eye at a time. Apply a thin coat of petroleum jelly under the eye area and apply enclosed eye shields. Make sure eye shields are placed directly below the lower eyelashes. This will prevent staining
If using single application packets, remove the work station card and squeeze the entire contents of solution No 1 and No 2 onto the marked circles. DO NOT MIX
If using multi application tubes, remove cap of solution No 1 Cream Colorant and pierce the protective film on front end of the tube
Apply solution No 1 onto the lashes with enclosed applicator in a downward motion towards the eye shield. Let stand a few seconds. Do not remove color
Wipe applicator stick clean and apply solution No 2 over solution No 1. Be sure to coat each eyelash hair thoroughly including ends and corners of the eyelashes. Let stand one minuteRemove color with a damp tissue by wiping downward towards the eye shield. Wash lashes with water to remove any residue. The tinting process is now complete
TINTING YOUR EYEBROWS
Apply petroleum jelly around the eye area to prevent accidental staining. Be careful not to get any on the eyebrows
.Follow directions 2-5 for tinting the eyelashes. They are the same
STAINING THE SKIN HAS OCCURRED
Stains will disappear in 1-2 days. To speed up the process, create a mild exfoliate of water and sugar, and rub gently on stain and rinse with waterApply a matte makeup or powder to cover stain.
A SLIGHT STINGING SENSATION AFTER APPLYING HAS OCCURRED
A slight stinging sensation is somewhat common and should subside quickly after rinsing with water. If stinging persists, discontinue use and seek medical attention.
Choose options
The most low-maintenance way to make your lashes to appear fuller and more prominent with no mascara needed. Waterproof, drip proof, smear proof, and sweat proof.
How To Use:
If using single application packets:
Squeeze a small amount of solution No 1 onto the end of the applicator stick
Apply to the inside of your arm
Do the same with solution No 2 and apply over the same spot as solution No 1. Let stand one minute and wipe clean
Place both foil packets back into the zip lock bag and store in a cool, dry place. Wait 24 hours. If no visible signs of irritation exists, you may proceed with tinting the lashes. Do not use this product if irritation is visible
If using multi application tubes, remove cap on solution No 1 Cream Colorant and use the cap to pierce the protective film on the tube. Follow the same instructions as above.
TINTING YOUR EYELASHES
For best results, wash lashes thoroughly with a mild soap and warm water, or use an oil free makeup remover. Let dry before tinting.
It is best to tint one eye at a time. Apply a thin coat of petroleum jelly under the eye area and apply enclosed eye shields. Make sure eye shields are placed directly below the lower eyelashes. This will prevent staining
If using single application packets, remove the work station card and squeeze the entire contents of solution No 1 and No 2 onto the marked circles. DO NOT MIX
If using multi application tubes, remove cap of solution No 1 Cream Colorant and pierce the protective film on front end of the tube
Apply solution No 1 onto the lashes with enclosed applicator in a downward motion towards the eye shield. Let stand a few seconds. Do not remove color
Wipe applicator stick clean and apply solution No 2 over solution No 1. Be sure to coat each eyelash hair thoroughly including ends and corners of the eyelashes. Let stand one minuteRemove color with a damp tissue by wiping downward towards the eye shield. Wash lashes with water to remove any residue. The tinting process is now complete
TINTING YOUR EYEBROWS
Apply petroleum jelly around the eye area to prevent accidental staining. Be careful not to get any on the eyebrows
.Follow directions 2-5 for tinting the eyelashes. They are the same
STAINING THE SKIN HAS OCCURRED
Stains will disappear in 1-2 days. To speed up the process, create a mild exfoliate of water and sugar, and rub gently on stain and rinse with waterApply a matte makeup or powder to cover stain.
A SLIGHT STINGING SENSATION AFTER APPLYING HAS OCCURRED
A slight stinging sensation is somewhat common and should subside quickly after rinsing with water. If stinging persists, discontinue use and seek medical attention.
The most low-maintenance way to make your lashes to appear fuller and more prominent with no mascara needed. Waterproof, drip proof, smear proof, and sweat proof.
How To Use:
If using single application packets:
Squeeze a small amount of solution No 1 onto the end of the applicator stick
Apply to the inside of your arm
Do the same with solution No 2 and apply over the same spot as solution No 1. Let stand one minute and wipe clean
Place both foil packets back into the zip lock bag and store in a cool, dry place. Wait 24 hours. If no visible signs of irritation exists, you may proceed with tinting the lashes. Do not use this product if irritation is visible
If using multi application tubes, remove cap on solution No 1 Cream Colorant and use the cap to pierce the protective film on the tube. Follow the same instructions as above.
TINTING YOUR EYELASHES
For best results, wash lashes thoroughly with a mild soap and warm water, or use an oil free makeup remover. Let dry before tinting.
It is best to tint one eye at a time. Apply a thin coat of petroleum jelly under the eye area and apply enclosed eye shields. Make sure eye shields are placed directly below the lower eyelashes. This will prevent staining
If using single application packets, remove the work station card and squeeze the entire contents of solution No 1 and No 2 onto the marked circles. DO NOT MIX
If using multi application tubes, remove cap of solution No 1 Cream Colorant and pierce the protective film on front end of the tube
Apply solution No 1 onto the lashes with enclosed applicator in a downward motion towards the eye shield. Let stand a few seconds. Do not remove color
Wipe applicator stick clean and apply solution No 2 over solution No 1. Be sure to coat each eyelash hair thoroughly including ends and corners of the eyelashes. Let stand one minuteRemove color with a damp tissue by wiping downward towards the eye shield. Wash lashes with water to remove any residue. The tinting process is now complete
TINTING YOUR EYEBROWS
Apply petroleum jelly around the eye area to prevent accidental staining. Be careful not to get any on the eyebrows
.Follow directions 2-5 for tinting the eyelashes. They are the same
STAINING THE SKIN HAS OCCURRED
Stains will disappear in 1-2 days. To speed up the process, create a mild exfoliate of water and sugar, and rub gently on stain and rinse with waterApply a matte makeup or powder to cover stain.
A SLIGHT STINGING SENSATION AFTER APPLYING HAS OCCURRED
A slight stinging sensation is somewhat common and should subside quickly after rinsing with water. If stinging persists, discontinue use and seek medical attention.
EXPLORE More COLLECTIONS
Total Beauty Experience
A Store Like No Other
Our beauty and gift store has been proudly serving the Sacramento community since 1994 as a women-owned, independent local business. We offer a full-service salon alongside a thoughtfully curated store with 10,000 sq ft and featuring over 1,000 brands from haircare and skincare to cosmetics, men’s grooming, gifts, and apparel. As we’ve grown, our space and selections continue to evolve with the goal of bringing our community the best in beauty and lifestyle.
